Exibel BHX60 Kurzanleitung

Wireless Headphones
Art.no 38-9080-1, -2, -3, -4 Model BHX60
Please read the entire instruction manual before using the product and then
save it for future reference. We reserve the right for any errors in text or images
and any necessary changes made to technical data. In the event of technical
problems or other queries, please contact our Customer Services.
Things to consider:
• Other wireless equipment using the same frequency band can reduce the range.
• The range of all wireless equipment depends on the type of obstacles located
between the transmitter and the receiver (e.g. a concrete wall will interfere
with the signal more than a plasterboard wall).
If you experience problems, try the following:
• Turn off any other existing wireless equipment to check whether this is
the cause of the problem.
• Reposition the wireless equipment, shorten the distance between
the transmitter and the receiver or reduce the number of obstacles (walls,
furniture, etc.) between them.
• Reattempt to establish a connection between the headphones and your
external device.
Safety
• Do not subject the product to impacts, shocks, humidity, water, extreme
temperatures or dusty conditions.
• Check your local regulations regarding mobile phone use in combination with
driving.
• Do not use the product in areas where you are requested to turn off your mobile
phone, such as in hospitals, aircraft or areas where there is a risk of explosion.
• Protect your hearing. Listening on high volume for prolonged periods can
lead to permanent hearing loss. Set the volume to a low level before using
the product.
• Do not use the product in the event of a thunderstorm, risk of electric shock.
• Never attempt to repair, modify or disassemble the headphones.
• Never let children play with the product.
Buttons and functions
1. [ ] On/off, Bluetooth connection,
call control and play/pause
2. Micro-USB port for the included
charger cable
3. Bluetooth and charging status
indicator
4. Microphone
5. 3.5 mm input jack for connecting
external devices
1
2
3
UNITED KINGDOM - CUSTOMER SERVICE contact number: 020 8247 9300 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.co.uk postal: 10 – 13 Market Place, Kingston upon Thames, Surrey, KT1 1JZ
English
Instructions for use
Charging
Charge the headphones battery for at least 4 hours before first use. Subsequent
charging time will take approx. 2–3 hours.
1. Connect the included charger cable to the USB port (2) on the headphones
and to a computer or other USB charger.
2. The LED indicator (3) will shine a steady red while charging is in progress and
change to blue when the battery is fully charged.
On/off
Hold in [ ] (1) until the Bluetooth indicator (3) lights up and the headphones
emit an audible signal. Long press again until the headphones emit an audible
signal to switch off.
Bluetooth connection
1. Hold in [ ] (1) until the Bluetooth indicator (3) lights up and the headphones
emit an audible signal. After a few seconds, the LED indicator will begin to flash
blue/red. The headphones are now detectable for other Bluetooth devices.
2. Activate Bluetooth on the device that you intend to connect the headphones
to (smartphone, tablet, laptop, etc.).
3. The headphones will appear on your device as BHX60, select them and pair
them with your device.
4. Once pairing has been successful a beep will be emitted and the LED
indicator will flash every ten seconds.
If you are prompted to enter a PIN code on your device, enter 0000 (four zeroes).
Certain devices may also require you to approve the connection.
Manage music playback from an external device connected via Bluetooth
Press [ ] briefly for play/pause.
You cannot change tracks or adjust the volume on the headphones.
Managing an incoming call
If you have connected a mobile phone to the headphones via Bluetooth and
receive a call whilst you are listening to music, the headphones will emit a ring
signal and the music will be switched off automatically. Once the call has ended,
music playback will be resumed (if your phone settings enable this).
• Press [ ] to answer the call.
• Press again to end the call.
• Hold in to reject the call.
3.5 mm connection
Connect the included 3.5 mm audio cable between your device and the aux input
jack (5) on the headphones. Playback must then be controlled from your device.
4
You do not need to turn on the headphones to listen via the 3.5 mm jack.
5
Care and maintenance
• Use a dry cloth to wipe the headphones clean when needed.
• Always switch the headphones off when they are not in use.
• Fully charge the built-in headphone battery at regular intervals (every other
month) if the headphones are not to be used for a long time.
Troubleshooting guide
The headphones The battery might be flat. Charge the battery.
will not switch on.
No sound • Check the volume on your device and play/pause
from a device status on your Bluetooth device and headphones.
connected via • Make sure that the Bluetooth connection has been
Bluetooth. properly established.
• Test the playback of the file on the Bluetooth device on
its own to make sure it works before connecting it to
the headphones.
• Try using another file. The file may be incompatible or
damaged.
• Make sure that no other wireless devices are
disrupting the Bluetooth connection.
No sound when • Check the volume and play/pause on your external device.
an external • Check that the cable connecting the device and the
device is headphones is undamaged and securely connected.
connected via • Test the playback of the file on the device itself before
the 3.5 mm connecting it to the headphones.
input jack. • Try using another file. The file you are using may be
incompatible or damaged.
Responsible disposal
This symbol indicates that this product should not be disposed
of with general household waste. This applies throughout
the entire EU. In order to prevent any harm to the environment
or health hazards caused by incorrect waste disposal,
the product must be handed in for recycling so that the material
can be disposed of in a responsible manner. When recycling
your product, take it to your local collection facility or contact
the place of purchase. They will ensure that the product is
disposed of in an environmentally sound manner.
Specifications
Frequency range of headphones 2.402 – 2.480 GHz
Bluetooth version V 4.1
Charging Micro-USB 5 V, 500 mA
300 mAh Lithium-polymer, rechargeable
Battery
Talk/listening time Approx 8 hours on medium volume
Standby time Approx. 280 hours
2–3 hours (except for a minimum
Charging time
of 4 hours before initial use)
Bluetooth range 10 m
0–45 °C
Operating temperature
Weight 190 g