Hooking Up; Basic Hookups - Sony DPS-V77 Bedienungsanleitung

Hooking Up

Basic Hookups

• Before connecting this unit to another device, be sure to unplug the AC power cord from the power outlet.
• Turn off the power switch on this unit and all components to be connected, such as keyboards and active speakers
(speakers with built in amplifiers).
• After all the connections, double check that the connections are correct before plugging the AC power cord back into the
power outlet.
• If the connected components output large signals that cause distortion, adjust the INPUT knob on this unit to lower the
input level, or lower the output level of the connected component.
Example 1: Hooking up to an instrument
DPS-V77
Speaker
Example 2: Hooking up to a mixer (cutting the direct sound)
DAT Recorders
CD Players
When using the effector in a send-return loop
• We recommend setting the direct output level to – (minus infinity). (See "Cutting the Direct Sound (Dry On/Off)" on page 25.)
• We also recommend setting the BYPASS function to MUTE (as shown on page 15).
12
EN
Electric Guitar
MIDI Foot Controller
(HR-RC5, etc..)
Guitar Pre-Amplifier
IN
MIDI IN
OUT
Power Amplifier
Speaker
Microphones
etc
Audio Mixing Console
etc
DPS-V77
Speaker
IN
Effect Send
Effect Return
OUT
IN
Effect Send
Effect Return
OUT
Power Amplifier
Graphic Eqalizer
Key Board
IN
MIDI IN
OUT
Power Amplifier
Speaker
Main Monitor Speaker System
Power Amplifier
DPS-V77
DPS-V77
S
Monitor Speaker
S