Kin Pond 28 Gebrauchsanweisung Seite 5

Caution! You must observe the safety regulations. Make sure that the mains
voltage corresponds to that indicated on the nameplate and that it is possible
to establish a good earth connection.
It is recommended that fixed pump stations be fitted with a safety switch with
a trip current of less than 30 mA. The pump can be used in liquids with a
temperature of up to 35 ºC.
Maintenance and cleaning
For regular maintenance, cleaning of the rotor group is sufficient. In any case,
the pump should always be disconnected from the power supply before
carrying out any repair and maintenance work. To clean the rotor group,
proceed as follows: turn the ring to free the suction grate. Pull the suction
grate from the bottom of the pump, take out the impeller complete with
magnet - shaft - rubbers. Rinse everything with a jet of water. To reassemble
the various parts, proceed in reverse order. When restarting the pump, always
check that the suction filter is fitted, in order to avoid danger and the risk of
coming into contact with moving parts.
Warranty
This product is guaranteed for 2 years from the date of purchase against
defects in materials and manufacturing defects. The warranty certificate must
be completed by the reseller and must accompany the unit, together with the
purchase receipt or equivalent document, when it is returned for repair. The
warranty consists of the replacement of defective parts. In the event of
improper use, tampering or negligence on the part of the purchaser or user,
the warranty shall become immediately null and void. The warranty is also
invalid if the purchase receipt or equivalent document is not presented. The
costs of dispatch and return shall be borne by the purchaser.
kinpumps.com
Pond 28
GB
5