Operating; Bowens S-Type Mount - Rollei Lumen Studio 100 Bi-Color Anleitung

Operating

18
Insert the mains cable supplied into the mains cable socket [8]
of the Rollei Lumen Studio 100 Bi-Color . Press the on/off switch
[7] to position „I" to switch on the LED light . In position „O",
the light is switched off .
Note: Before use, remove the protection cap on the LED con-
tinuous light by using the release of the Bowens S-type mount
[2] . After use, put the protection cap back on by placing it on
the LED continuous light like a light shaper and letting it click
into place (for instructions see „Bowens S-type Mount") .

Bowens S-type Mount

• The Rollei Lumen Studio 100 Bi-Color is equipped with a
Bowens S-type mount [11] for the use of various light
shapers (softboxes, reflectors, beauty dishes, etc .) .
• Insert the light shaper with the three bayonet pins into the
corresponding recesses on the LED lighting head and lock
it by turning it briefly to the right until it audibly clicks into
place .
• To remove the light shaper, pull the release of the Bowens
S-type mount [2] to the rear, turn the light shaper to the left
and pull it off to the front .
ENGLISH