Becker Centronic EasyControl EC511-III Montage- Und Betriebsanleitung Seite 25

10s
Deleting all transmitters (except the master
transmitter)
3s
3s
10s
Then re-press the programming button of the
transmitter to be deleted for 10 seconds.
▻ The receiver confirms.
► The transmitter is now deleted from the radio
receiver.
Press the programming button on the master
transmitter for 3 seconds.
▻ The receiver confirms.
Re-press the programming button on the master
transmitter for 3 seconds.
▻ The receiver confirms.
Then press the programming button on the mas-
ter transmitter again for 10 seconds.
▻ The receiver confirms.
► All transmitters (except the master transmit-
ter) are now deleted from the radio receiver.
25 - en