Werbung
Verfügbare Sprachen
Verfügbare Sprachen
94878L
General notes:
Our tools were constructed and produced with the greatest care and are only to be used for
applications according to specification. The tools may be used by trained specialist personnel
only. SW-Stahl does not assume any liability for inappropriate application and any damages
resulting from this to persons, objects or devices. In case of inappropriate use or a change of the
products, the guarantee is voided.
The operating instructions made available by SW-Stahl are considered as basic information for
the professional operation of our tools. They do not relieve the user of his obligation to read and
consider the technical documentation of the vehicle manufacturer. This documentation always
has priority over the directions in these instructions.
SW-Stahl reserves the right to change the implementation and designation of the tools, and the
materials used in them, without prior announcement. This applies in particular in case of
adapting the products to the latest state of the art of the technology.
Use according to specification:
This installation and dismantling set for rotating shaft seals is used for the professional
dismantling and installation of rotating shaft seals without damaging the shaft and/or the seal
seat. It is a universal tool set and it can occur that, as a result of design-type-related conditions,
the tool cannot be employed. This does not mean that there is a defect present. Any changes to
the product are basically prohibited.
Set contents:
94878L-1
Pull-off device
94878L-2
Steel hook, 70 mm
94878L-3
Steel hook, 114 mm
94878L-4
Base pressure disk
94878L-5
Adapter ring, 8.1 mm inner diameter
94878L-6
Adapter ring, 10.2 mm inner diameter
94878L-7
Adapter ring, 12.2 mm inner diameter
94878L-8
Adapter ring, 14.2 mm inner diameter
94878L-9
Adapter ring, 16.2 mm inner diameter
94878L-10
Adapter ring, 18.2 mm inner diameter
94878L-11
Adapter ring, 20.2 mm inner diameter
94878L-12
Adapter, height 10 mm
94878L-13
Adapter, 18 mm
94878L-14
Adapter, 22 mm
94878L-15
Adapter, 27 mm
94878L-16
Adapter, blue, ø 21.6 / 27.6 mm
94878L-17
Adapter, blue, ø 40.0 / 45.9 mm
94878L-18
Adapter, blue, ø 43.0 / 48.9 mm
94878L-19
Adapter, blue, ø 50.3 / 56.0 mm
94878L-20
Adapter, blue, ø 58.0 / 64.0 mm
94878L-21
Adapter, blue, ø 27.5 / 33.6 mm
94878L-22
Adapter, blue, ø 36.0 / 41.9 mm
SW-Stahl GmbH
An der Hasenjagd 3
D-42897 Remscheid
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
E-Mail: info@swstahl.de
Werbung
