Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Betriebsanleitung / Operation manual
Leergehäuse Poly / Empty Enclosures GRP
____________________________________________________________________________________________________________
12.
Assembly and Disassembly
While installation & operation of electrical plants in hazardous areas the installation &
operation instructions has to be considered anytime (e.g. BetrSichV, IEC/EN60079-14,
and national regulations).
Please notice the information marked on the label of the product and in EC type-examination
certificate. Further information can be found in the Quintex product data sheets and is
indicated on the product.
WARNING – DO NOT OPEN WHEN ENERGIZED!
DANGER
Death or severe injury because of improper use.
WARNING
Injury because of wrong procedure.
Assembly, disassembly, installation and commissioning may only be made by qualified
personnel who are skilled for installation of electrical components in hazardous areas.
For mounting and operation of hazardous plants you have to consider the mounting and
operating conditions.
Do not disassemble or modify enclosures being under power
Please consider mounting manual and operation manual of all single components.
While mounting please take care of: Install enclosure torsion-free on ground.
NOTE
For enclosures mounted outside there has to be made special preparations
to guarantee a safe operation to the demands e.g. usage of devices for
protection of the enclosure against rain, "housing" of the enclosure with
adequate protection class
____________________________________________________________________________________________________________
Version 11/2020
Seite/page 26/31
Werbung
