Quintex QX-P1 Bedienungsanleitung Seite 20

Betriebsanleitung / Operation manual
Leergehäuse Poly / Empty Enclosures GRP
____________________________________________________________________________________________________________
6. Component marking "U"
The sign "U" placed behind the certificate number indicates that this certificate should not
be confounded with certificates issued for equipment or protective systems.
This component certificate only serves as a basis for the issuing of certificates for
equipment or protective systems.
7. Type key
- /
Q_ _ _ _ _
____________________________________________________________________________________________________________
_ _ _ _ _
Quintex Ex-e enclosure
GRP enclosure
Dimension (mm)
P1 = 80 x 75 x 55
P2 = 110 x 75 x 55
P3 = 160 x 75 x 55
P4 = 190 x 75 x 55
P5 = 122 x 120 x 90
P6 = 220 x 120 x 90
P7 = 160 x 160 x 90
P8 = 260 x 160 x 90
P9 = 360 x 160 x 90
P10 = 200 x 250 x 120
P11 = 255 x 250 x 120
P11H = 255 x 250 x 160
P12 = 400 x 250 x 120
P12H = 400 x 250 x 160
P13 = 405 x 400 x 120
P13H = 405 x 400 x 200
P15 = 600 x 250 x 120
P15H = 600 x 250 x 160
Digits not relevant for explosion
protection
Version 11/2020 Seite/page 20/31