Inhaltsverzeichnis
Werbung
entrance and mount it on the left
upper hinge.
•
Install bottom hinge-bolt at left
side of the door.
•
Screw in bottom hinge inside min-
ibar
•
Install both left and right hinge
cover.
Model MB 32 BGD and MB 34 BGD
•
Take out the bottom hinge.
•
Take out hinge cover.
•
Take out door.
•
Take out the top hinge after loos-
ening the three screws
•
Take out hinge hole covers.
•
Install door and top hinge.
•
Install bottom hinge.
•
install hinge covers.
Ventilation requirement
MB 32 B:
•
There must be more than 3 cm of
air on both sides, and at the top
and depth.
MB 34 B:
•
There must be more than 3 cm of
air on both sides, and more than 5
cm in top and depth.
MB 32 BGD and MB 34 BGD:
•
There must be more than 5 cm of
air on both sides and in top and
depth.
Trouble shooting
Does not work:
•
Is the power off?
•
Is there a connection to the
socket?
•
Is there light in the lamp?
•
Is the ambient temperature very
high?
The internal temperature is not good
enough
•
Is the door closed properly?
•
Does it comply with the ventila-
tion requirements?
•
Is the ambient temperature very
high?
CE declaration of conformity
This appliance has been man-
ufactured to the strictest
standards and complies with
all applicable legislations, Low
Voltage Directive (LVD) and Electromagnetic
Compatibility (EMC).
UKCA declaration of conformity
This appliance has been manu-
factured to the strictest stand-
ards and complies with all ap-
plicable legislation.
Werbung
Inhaltsverzeichnis
