SwitchBot Hub 2 Benutzerhandbuch Seite 9

Device Status Description
Adding Device
Device Status
Indicator light flashes rapidly.
Indicator light flashes slowly.
Indicator light stays lit up.
Indicator light flashes once.
Upgrading Firmware
Device Status
Indicator light starts flashing slowly and
other lights on the display go off.
The display lights up and indicator light
flashes slowly.
The display and indictor light both stay lit
Learning Remote Control
Device Status
Indicator light lights up for 2 seconds then
goes off.
Indicator light flashes twice after you press
your remote control.
Indicator light flashes once after 10
seconds
Temperature and Humidity
Device Status
Description
What to Do
Please visit support.switch-bot.com for detailed information.
up.
Description
In pairing mode.
Connecting to the Internet.
Working normally.
Remote control added or your SwitchBot
Bluetooth device is operated via the app
once.
Description
Upgrading firmware.
Firmware upgraded successfully.
Connected to the Internet.
Description
Ready to learn remote control.
Remote control learned successfully.
Learning timeout. Failed to learn remote
control.
Buzzer beeps continuously. Temperature
and humidity readings and button lights
flash constantly.
Temperature or humidity reading reaches
its set value.
Press any button on your Hub 2 to lift the
alert or wait for 30 seconds for the alert to
go off itself.
9