SwitchBot Hub 2 Benutzerhandbuch Seite 7

Placement Tips

As shown above, make sure your appliance to be controlled is within Hub 2's infrared
range.

Since the infrared signal can be blocked by walls and other physical objects, make
sure there are no obstacles between Hub 2 and your appliance.

Make sure your appliance works well and is at an appropriate angle to your Hub 2.

For better Internet connection strength, please place Hub 2 near your router.
Option 1: Place your Hub 2 on a horizontal surface
Unfold the stand on the back of your Hub 2 and place it on a horizontal surface like a table
or a shelf. Pull straight the cable when it goes through the hole on the stand, so that the
cable does not affect your Hub 2's stable standing.
Option 2: Attach your Hub onto a wall with the adhesive tape
Step 1: Stick the adhesive tape to the back of your Hub 2.
Step 2: Find an appropriate position and attach your Hub 2 there.
Find an appropriate position and test whether your Hub 2 works well with your appliance in
this position. If everything works well, clean the surface and stick your Hub 2 there. Then
press it for about 30 seconds to ensure it is securely attached. The adhesive tape can stick
better to smooth door surfaces, glass and ceramic tiles.
7