Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation
The transducer and its main parts
Number
Description
1
Tip M2.5
2
Bellow
3
Shaft 8h6
4
Product and serial
number
5
Electronic
6
M8 Connector (male)
Fixing the transducer
The transducer can be clamped on all shaft positions. Take attention to not
overthight what could influence the linear bearing preload. The clamping elements
must spread the force as good as possible to a wide area.
Page 14/20
Functionality
Tip with M2.5 thread. Can be exchanged with
supplied special wrench.
Sealing Bellow made of Viton (R)
(L models seal with an air gap and therefor lack
of a bellow)
Shaft to fix the transducer in common 8h6
clamping bushes
Unique serial number for product life cycle tra-
cking. Production, recalibration and may added
accessories or made configuration changes
can be tracked with.
Housing 11h6 consisting of the conditioning and
communication electronics
Connection on M8 standard
Manual digital IO-Link Transducer
Series T070, T200, T100, T500
PRDK-0000032-DE-EN-003
Werbung
