ZOSI 1ND-5122M-W Schnellstartanleitung Seite 4

My Device Select Addition Method WiFi Smart link
2.2 Indoor PT Camera
This camera has voice function and PT control system; it will provide voice prompts when
you reset and add device. Connect your device to the power supply and let it be charged for
20 seconds to ensure that the device is in working condition (with voice prompt "Ready to
Connect"). The type of selected device is: PT-IP Camera.
2.2.1 WiFi Smart Link (Create QR Code--Recommend)
A. Connect your phone to the available WiFi network. Put your phone and the corresponding
device near the router as close as possible.
B. Select type of the device (IP camera).
C. Click the "WiFi Smart Link" and enter the WiFi password accordingly.
D. Click "Create QR Code(Recommend)" and then your phone will enter the QR Code
configuration page.
E. Wait for 20 seconds and click "Next" after hearing the voice prompt "The device is Waiting
for Connecting".
F. Target the created QR Code shown on the phone towards the camera within the optimum
distance of 10 centimeters.
G. Click "Next" after hearing the voice prompt "Wireless Configuration Succeed".
H. Scan the QR Code on the device after hearing the voice prompt "Wireless Connection
Succeed" and enter the password (initial password: admin) to complete the device adding
process.
3