Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EC-Manufacturers Declaration
acc. to Machine Directive 98/37/EG Appendix II B of European Parliament and Council of 22
Manufacturer: Pumpenfabrik ERNST VOGEL GmbH
A-2000 Stockerau, Ernst Vogel-Strasse 2
Products:
Pumps of model ICB
The mentioned products are intended
into operation is forbidden so long, till it is proven, that the machine, in which the pump shall be integrated,
corresponds with the regulations of the Machine Directive 98/37/EG.
Used harmonised norms, especially
EN 809
EN ISO 12100 part 1
EN ISO 12100 part 2
Used national technical norms and specifications, especially
DIN 31001
The Declaration of the Manufacturer expires, when the pump is installed into units, where no declaration of
conformity, acc. to the Machine Directive 98/37/EG, is existing.
Stockerau, 22.05.2003
1)
Strike out what´s not the case
EC-Declaration of Conformity on customer buyouts
If essential components of the unit (e.g. motors) are provided by the customer and only the assembly of
these components is made by Vogel, the whole conformity must be proved by the customer!
(only valid for pump)
Installation into a machine
for
1)
/ Assembly with other machines
................................................................................................
ICB - german/french/english
Artikel Nr. 771076106
nd
June 1998.
1)
. Their putting
Robert Salzbauer
Quality control
Revision 01
Ausgabe 04/2007
Werbung
