Werbung
Verfügbare Sprachen
Verfügbare Sprachen
MAINTENANCE SCHEDULE
Component
Air filter
Spark plugs
The machine as a whole
Fuel filter
Cylinder and silencer
CYLINDER AND SILENCER
To reduce the risk of fire, regularly clean the cylinder finns with compressed air and clear the
silencer area of dust, leaves and other debris.
STARTING SYSTEM
To avoid overheating and damage to the engine, always keep the cooling air vents clean and free of
sawdust and dirt. The starter cord should be replaced as soon as it shows signs of wear.
NUTS AND BOLTS
Periodically check that all nuts and screws are tight and that the handles are securely fastened.
P. Lindberg A/S
Tel.: 70212626
Task
Inspect, clean and replace if
necessary.
Check, clean, adjust and
replace if necessary.
Thoroughly inspect the entire
machine and check for
damage and defects, including
loose or missing components;
and
Repair them if necessary.
Clean
Replace
Clean
25
Sdr. Ringvej 1
DK-6600 Vejen
Interval
Every 10 hours of operation
(more often in dusty
environments).
Every 10/15. Operating hour
Change after every 50 hours of
operation
Before each application
Every 50 hours of operation
Every 50 hours of operation
1 x annually (possibly by a
professional)
Every 50 hours of operation or
as needed.
MAN 9067814 EN V1
www.p-lindberg.dk
e-mail: salg@p-lindberg.dk
Werbung
