Werbung
TO PLAY ONLY DESIRED TRACKS
Programming a pause
Inserting a pause in your program can be very useful when carrying
out recording. Press i! instead of entering a track number.
"PA"
appears on the display.
.
e@
For example, when recording on both sides of a cassette tape,
if you program a pause after the last track to be recorded on
the first side, program playback will pause at that point to allow
you to switch tape sides. To resume program playback after the
player enters pause mode, press II.
NOTES:
@
A pause can be programmed only when the program procedure
is performed under stop mode.
e
A pause cannot be programmed at the beginning of a program,
nor can two pauses be programmed one after the other.
e@ A pause inserted in a program is counted as one step.
e
/f a pause is programmed as the last step of a program, the
player will not enter the pause mode.
To clear all of the program contents
sesh
Wee Hee
® In the stop mode, press ™.
When the disc tray is ejected, the program contents will be
cleared.
:
To erase a program
vay
Vel (PD-203)
POUR LIRE UNIQUEMENT LES PISTES VOULUS
Programmation d'une pause
de piste. "PA" apparait sur l: panneau d'affichage.
REMARQUES:
e
Une pause insérée dans un programme
est comptée comme
une étape.
OPEN / CLOSE
|. |
/)
® En mode d'arrét, presser Ml.
Quand le tiroir de disque est éjecté, le contenu du programme
sera effacé.
Pour annuler un programme
In the program mode, press CLEAR.
The last program step is erased and the contents of the previous
program step are displayed.
NOTE:
Contents of a program
can be erased during playback as well.
However, tracks preceding the currently playing track cannot be
erased in this way.
32
<PRE1194>
En/Fr
En mode de programme, presser CLEAR.
La derniére étape du programme
est effacée et le contenu de
I'étape de programme précédente et affiché.
REMARQUE:
Le contenu d'un programme peut aussi étre effacé en cours de
lecture.
Cependant,
les pistes précédant
la piste en cours de
lecture ne péut pas étre effacée de cette maniére.
Werbung
