Levenhuk Ermenrich Reel BD30 Bedienungsanleitung Seite 5

Length measurement (auto). Select "Length" in the menu, then press ENTER to enter the measurement interface. To start measuring,
•
press ENTER as you continue walking around the area to be measured. A track line on the screen indicates that measuring is in progress.
To finish measurements, press ENTER. The results will appear on the screen (m, km, unit price, total price, longitude, latitude, date).
• Length measurement (manual). Select the manual mode in Settings, then press "Length". The first measurement point will be saved as
the starting point. Press SAVE when reaching the second, third and last measurement point before returning to the first one. Press ENTER
to see the readings.
• Slope measurement (auto). Select "S-Slope" in the menu, then press ENTER to enter the measurement interface. Stand on the highest
point and press ENTER. Stand on the lowest point and press ENTER. To start measuring, press ENTER as you continue walking around the
area to be measured. A track line on the screen indicates that measuring is in progress.
To finish measurements, press ENTER. The results will appear on the screen (slope, unit price, total price, longitude, latitude, date).
• Slope measurement (manual). Select the manual mode in Settings, then press "S-Slope". The first measurement point will be saved
as the starting point. Press SAVE when reaching the second, third, and last measurement point before returning to the first one. Press
ENTER to see the readings.
• Width mode (auto). The width mode is suitable for measuring a large plot of land of regular shape.
• Select "S-Width" in the menu and then press ENTER to go to the measurement interface. Enter the width of the vehicle, press SAVE to
confirm the data, and then press ENTER to calculate the path of the operation. During the measurement process, the device must be
placed in the center of the vehicle cab.
Vehicle mode. The vehicle mode is suitable for measuring a large plot of land of irregular shape.
•
5