Levenhuk Ermenrich Reel BD30 Bedienungsanleitung Seite 4

Ermenrich Reel BD30 GPS Land Meter
EN
Please carefully read the safety instructions and the user manual before using this product. Keep away from children. Use the device only as
specified in the user manual.
Getting started
• Press the ON/OFF button to turn the device on/off. The menu will be shown.
• The device will start locating satellites. Start taking measurements when all 6 satellites are detected. If the geopositioning fails, press
ENTER. When the geolocation is detected, press ENTER to proceed.
Usage
• Flat area measurement (auto). Select "S-Flat" in the menu, and then press ENTER to go to the measurement interface. To start
measuring, press ENTER as you continue walking around the area to be measured. A track line on the screen indicates that measuring
is in progress.
To finish the measurements, press ENTER. The results will appear on the screen (area, price per unit, total price, longitude, latitude, date).
• Flat area measurement (manual). Select the manual mode in Settings, and then press "S-Flat". The first measurement point will be
saved as the starting point. Press SAVE when reaching the second, third, and last measurement point before returning to the first one.
Press ENTER to see the readings.
4