Velleman VM133 Bedienungsanleitung Seite 5

INSTALLATION
!!! DISCONNECT AC
POWER DURING SETUP !!!
N
L
IMPORTANT SAFETY INFORMATION:
DISCONNECT OR TURN OFF THE AC POWER
DURING INSTALLATION!
Locate the wires going to the appliance or light, or just disconnect
the wires on the appliance or light.
Locate a suitable place to fix the module (do not fix it yet)
• Open the enclosure (3 screws at the bottom)
• Connect the wires coming from the switch or circuit breaker with
the INPUT (IN)
• Connect the wires going to the lamp or appliance with the OUT-
PUT (OUT)
if possible respect the Neutral and Live colors (Neutral is likely to be blue).
if an earth wire is connected to the appliance or lamp fixture, do not cut it.
Module is intended for fixed applications.
Do not use for portable applications
Installation
5