Herunterladen Diese Seite drucken

Caliber CXQ20 Bedienungsanleitung

Equalizer/frequenzweichen-systems

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Thank you for choosing a Caliber product. In doing so you've demonstrated a
desire to own the finest in Car Audio Technology. Caliber strives to provide you
with the finest products possible, and is always looking for ways to please our
customers even more.
Properly installed, your Caliber CXQ20 will provide years of high quality sonic
reproduction. Before installing this Equalizer/crossover in your vehicle, please
read this entire manual carefully, in order to protect your vehicle, and get the
maximum performance of your mobile sound system.
Caliber Warranty
Due to the complexity of our products, we strongly recommend that this
Equalizer/crossover is installed by your authorized Caliber dealer. If properly
installed by your dealer we provide a warranty for 12 month from the date of
purchase.
If you install this Equalizer/crossover yourself, we wish you lots of fun and succes
in doing so. If you follow our guidelines, you'll get the best result. Our warranty,
however, will be limited to and not exceed 30 days from the date of purchase.
Caliber Accessories
To realize the exceptional performance of which this Equalizer/crossover is capa-
ble, it is necessary that power sources, signal sources, speakers and intercon-
nects are of the highest quality. Remember that Caliber is a specialized manu-
facturer of all sorts of Car Audio components.We also manufacture everything
needed for the 'optimal' Car Audio System (except the car). So be sure to 'Get
Connected' with Caliber and ask your local Caliber dealer for our accessories.
Important
The quality of installation may effect the performance and reliability of a Caliber
CXQ20 Equalizer/crossover. If you have any doubts or questions regarding
installation or use, don't hesitate to contact your official Caliber dealer.
A Caliber dealer is selected for his knowledge in auto sound, and has been trained
to give you great advice and service.You can always count on him to give you
advice for any technical problems and will keep you informed on the latest pro-
ducts by Caliber.
We wish you lots of enjoyable moments with your newest toy.Adjust the sound
to perfection, but keep paying attention to the road whilst doing so.
1

Werbung

loading

Inhaltszusammenfassung für Caliber CXQ20

  • Seite 1 Caliber dealer. A Caliber dealer is selected for his knowledge in auto sound, and has been trained to give you great advice and service.You can always count on him to give you advice for any technical problems and will keep you informed on the latest pro- ducts by Caliber.
  • Seite 2 If the LED is illuminating, back the input level control (2) to a less sensitive setting. 15 Fuse 1A The 1A fuse will help to protect the CXQ20 in case of a short. 5 Low Pass Output 16 Power Indicator LED Docking ports for the RCA connectors leading to your sub-woofer amplifier.
  • Seite 3: Signal Output

    Mounting your CXQ20 Signal input Find a steady, secure area to mount your CXQ20. Be sure it is accessible, but not in The next to connect is your signal input. Choose the correct length and style of an area where the equalizer sliders or any other adjustments may be bumped by RCA patch cables for your needs.
  • Seite 4 Real Time Analyzer (RTA).Without a RTA it will be hard to distinguish the dips 7 Check the input peak LED (4) on your CXQ20 and make sure it is not illumina- and peaks, and to value how much to adjust them. Wheter you use a RTA or ting.
  • Seite 5 Remote control on your dashboard.After you have plugged in your telepho- à contacter votre revendeur Caliber. ne jacks in the remote control and the CXQ20, you must turn up the Low Pass Un revendeur Caliber est sélectionné pour sa connaissance des installations output level a little.
  • Seite 6 Prises cinch pour raccorder le câble menant vers votre amplificateur de subwoofer. 15 Fusible IA Le fusible IA protégera le CXQ20 dans le cas d’un court-circuit. 6 Réglage du niveau de sortie passe-bas Ceci vous permet de régler le niveau de sortie pour accorder tant le niveau 16 LED de mise en service Ce témoin s’allumera lorsque le CXQ20 est cor-...
  • Seite 7 CXQ20 comme gabarit. Perces des ainsi de plusieurs de couches de protection pour une meilleure suppression des trous de 2,5 mm de section aux emplacements marqués et fixez le CXQ20 a bruits. (Consultez votre revendeur Caliber agrée pour plus d’informations sur l’aide des vis autotaraudeuses fournies d’orgine.
  • Seite 8 Réglez le bouton de volume à diffé- 2 Réglez le niveau d’entrée (2) de votre CXQ20 à 2/3 de son niveau maximum. rents niveaux et perfectionnez vos réglages. En faisant cela, écoutez des mor- ceaux de musique que vous connaissez bien.
  • Seite 9 Maintenant que vous avez égalisé le système en fonction de vos préférences, il Monaten ab dem Kaufdatum. est temps de revérifier les niveaux de sortie de votre CXQ20. Puisque vous avez Falls Sie das System lieber selbst montieren möchten, wünschen wir Ihnen dabei expérimenté...
  • Seite 10 “D/R” Ferneinschaltverzögerung. Diese Kontakte sind mit allen Verstärkern ten ist und die automatische Pegelbegrenzung einsetzt. In diesem Fall muß der und Frequenzweichen zu verbinden, die dem Equalizer CXQ20 nachgeschaltet Eingangspegel-Regler (2) auf eine weniger empfindliche Stellung zurückged- sind. Sie bewirken, daß die Einschaltung dieser Geräte nach der Einschaltung reht werden.
  • Seite 11 Schließen Sie Ihre Anschlußkabel an den Ausgang des signalgebenden Hauptgeräts der Sie auch die +12V-Spannung für die Verstärker an, verlegen Sie sie bis zum Einbauort des CXQ20-Systems und verbinden Sie beziehen, um Störungen durch Spannungsdifferenzen sie dort mit den entsprechenden Cinch-Signaleingangsbuchsen.Achten Sie darauf, zu vermeiden.Vergessen Sie nicht, am Ausgangspunkt...
  • Seite 12 10 Hören Sie sich die Wiedergabe einige Minuten lang an, um den Sound zu kont- 2 Stellen Sie den Eingangspegel-Regler (2) Ihres CXQ20-Systems auf 2/3 des rollieren. Probieren Sie nacheinander verschiedene Lautstärke-Einstellungen Endwerts. aus und nehmen Sie ggf. eine Feinabstimmung Ihrer Einstellungen vor.
  • Seite 13 Geräts und damit evtl. auch die Stärke des Ausgangssignals. Legen Sie noch ein- mal den dynamischen CD-Titel ein, den Sie für den anfänglichen Grundabgleich des CXQ20-Systems verwendet hatten. Stellen Sie die Lautstärke des Radios auf 3/4 des Höchswerts ein und justieren Sie die Ausgangspegel nach Bedarf. Falls eine Verzerrung hörbar wird oder die LED-Meldeleuchten “Ausgangssignal über-...