Werbung
6.
INSTALLATION
INSTRUCTIONS
1.
Measure the distance between the brackets to know how far you need to fix it to the wall.
Using the bracket template (at the end of this manual), mark the fixing points and use a drill
to drill the appropriate holes.
WALL
INSTALLATION
P. 46
CEILING
INSTALLATION
P. 48
WALL-TO-WALL
INSTALLATION
P. 50
28
L
2.
Remove the screws securing the
joints of the assembly to the side
brackets.
4.
You will need the assistance of another person to attach the brackets to the wall, which you
drilled in Step 1. As soon as the brackets are fixed in the correct position, install the awning
assembly removed in step 3.
5.
Next, place the screws that secure the assembly to the side supports. Fit the front bar onto
the arms using the connecting piece. Finally, insert the washer and the self-locking nut into
the connecting piece and tighten it.
3.
Remove
the
awning
assembly
and the tarpaulin with the plastic
components shown in the image.
29
Werbung
