Herunterladen Diese Seite drucken

AccuPower Accu-Manager AP 2020 Bedienungsanleitung Seite 11

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

The memory-effect: This is caused by a change in the crystals on the
electrodes in the battery. Because of its intelligent charging technique,
the AP 2020 can also avoid the memory-effect in new NiCd batteries
and override it in older ones. After 3-4 charging cycles, up to 90% of the
initial capacity of older NiCd batteries can be recovered.
The Battery capacity: AAA, AA, C, D and 9Volts batteries of any
capacity can be charged. The charger adjusts automatically the
charging current and charging time to reach maxium capacity. If
batteries become available in the market with higher capacity, the
charger will adjust automatically the charging time.
Automatic float charge: The cells are given a float charge after the
charging process is completed. Batteries that have been stored for a
long time can also be recharged with the AP 2020.
Overcharge Protection: Rechargeable batteries can also be left in
the charger for a longer period of time, as overcharging of the batteries
is not possible. This is due to the overcharge protection.
Flexibility: An adapter for a 120V/60Hz wall outlet and for a 12
Volt automobile electrical supply system is included with the
charger. The charger can also be used on solar energy (12-
16VDC/min. 800mA, 10-15W Solar Panel) in connection with a
suitable adapter.
Identification of defect batteries: The unit contains electronic
reverse battery protection and rejects batteries with reverse
polarity. In case a battery is defective, the corresponding LED will
remain off.
TIP:
NiCd batteries contain up to 20% Cadmium, a highly
poisonous, heavy metal. After use, please dispose of these
batteries only in specially designated collection points, never
through regular house garbage.

Werbung

loading