Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Charging:
- Diagnosis Phase:
- Charging Process:
- Charging End:
- Failure/Defect:
- Float Charging:
TECHNICAL FEATURES
AND FURTHER INFORMATION:
The 2 Micro-Controller: Developed in our R&D subsidiary, adjust to
the charging process, charging duration, state of health and capacity of
every single battery. A continuous data exchange between batteries
and chargers takes place so that optimal charging is achieved.
Conventional charging methods do not consider the ever changing
battery state of health leading to unsatisfactory results.
Single Channel Technology:
Each of the six channels are monitored and controlled separately.
Combination of sizes and battery chemistries is allowed. No need to
discharge the batteries before recharging. Batteries can also be
charged individually. Interruptions and additions can be made at any
time during the charging procedure.
The Charging Current: The maxium charging current per channel can
be up to 700 mA for AAA, AA, C, D cells and 30mA for 9Volt cells. The
charging current is adjusted permanently according to the quality, inner
resistance and fast charging capability of each individual battery.
The memory-effect: If NiCd batteries are not fully discharged before
being recharged, this point becomes their full operating capacity. The
battery "remembers", how far it was discharged and can no longer be
used beyond this point. To a lesser degree, the same memory-effect
occurs with NiMH batteries.
LED's are on for 3 second
LED's are blinking
LED's remain on
LED's remain off
Automatic after charging
ends (LED permanently on)
Werbung
