Error Messages - nVision Multi Chemistry 50W Bedienungsanleitung

The charger can display error messages when certain types of problems are detected. In any case
when an error occurs, check the connections, power supply, battery and settings.
REVERSE POLARITY
This indicates that there is a polarity reversal. Check the battery and connections.
CONNECTION BREAK
This indicates that the connection between the charger and battery was interrupted while the battery
was charging or discharging. Check the battery and connections.
SHORT ERR
This indicates that there is an electrical short-circuit on the charger output. Check the battery and connections.
INPUT VOL ERR
This indicates that there is a problem with the power supply. Check the power supply.
BREAK DOWN
This indicates a charger failure. Stop using the charger and seek assistance.
BATTERY CHECK
LOW VOLTAGE
This indicates that the battery voltage is too low. Check the battery and settings.
www.nvisionweb.net

Error Messages

21