Extra Information Display - nVision Multi Chemistry 50W Bedienungsanleitung

While the charger is charging or discharging the battery, by pressing the START key and using the +
and - keys you can modify the actual charge and discharge current. Then, press the START key again.
You can use the + and - keys to change the information displayed on the screen. Please refer to p.12
for information about the various screens available.
Once the charger has determined that the charge or discharge is complete, the charger stops and the
"FULL" or "END" message is displayed.
FULL 5.0A 8.00V
CHG 030:00 03000
While the charger is charging or discharging a battery, you can use the - and + keys to display extra
information.
NiMH Sensitivity
D.Peak Default
NiCd Sensitivity
D.Peak Default
End Voltage
8.4(2S)
4.10 4.10 0.00
0.00 0.00 0.00
16
Note: you can stop the current process
at any time by pressing the STOP key.

Extra information display

Indicates delta-peak sensitivity for NiMH
Indicates delta-peak sensitivity for NiCd
Indicates Lithium battery end voltage
Individual cell voltage display for lithium batteries
(only if balancing connector is used)
nVision Multi Chemistry High-End Charger