Nicd/Nimh Batteries - nVision Multi Chemistry 50W Bedienungsanleitung

Once the charger has determined that the charge or discharge is complete, the charger stops and the
"FULL" or "END" message is displayed.
FULL 5.0A 8.40V
CHG 030:00 03000
Note: you can stop the current process at any time by pressing the STOP key.
From the program select screen, use the STOP or - key to select NiCd or NiMH battery type and then
press the START key.
PROGRAM SELECT
NiMH BATT
NiMH CHARGE Man
CURRENT 5.0A
By pressing the + and - keys, you can select the different function modes:
NiMH CHARGE Man
NiMH CHARGE Aut
NiMH DISCHARGE
NiMH CYCLE
 Modifying the settings
To modify the charge settings, press the START key so that the charge current blinks. Use the +
and - keys to increase or decrease the charge current.
NiMH CHARGE Man
CURRENT 5.0A
www.nvisionweb.net

NiCd/NiMH batteries

Normal charge
Normal charge, auto charge current up to the user limit
Discharge the battery
Cycle the battery
13