Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Product Installation
Step 1: Power cord installation
Press the USB cable flatly into the
bottom power cord slot.
Step 2: Food bowl installation
Place the main body on a level surface install the food
bowl below the grain outlet.
Step 3: Connect the power supply
Take out the body of the smart feeder and insert the
power cord into the power adapter socket at the bottom
of the body to ensure that it is firmly inserted.
Optional: Battery installation
Put 4 AA batteries into the battery compartment as a backup
power source.
*Please make sure there is no grain in the barrel before
installing the battery.
*The barrel can installed upside down.
Attention: This is an emergency power supply for power failure.
If there is no such requirement, you can skip this step
Werbung
