Werbung
The red LED will flash for 15 times when you just switch
EN
and
then
To prevent incorrect signals and unnecessary photos, we recommend
not using the camera at sonny points and check that no branches are
in the
active
Alsocheck that the camera is set to the correct height in linewith ttKe
point to be observed. Where necessary, point the camera down for
optimum
50 c
The
PIR detection
temperature
The screen
3 minutes
the
camera
work
area
Of
sensor.
alignment
49
distance
reaches
or above
would
automatically
in SETUP mode,
automatically
and
Note
Please do the horizontal
movement
vertical
detect
Please quicken your steps when
you do the test in
before
would
be
shorter
30
turn off without
press any button
14
to Live mode
enters
the Standby
:
before
the
PIR.
movement
could
Correctly.
long distance
PIR detection
area.
if
environment
any operation
will make turn it on again.
(ON),
mode.
not
within
Werbung
