Somogyi Elektronic home LA 10 Q Bedienungsanleitung Seite 3

TABLE LAMP WITH WIRELESS CHARGER
Before using the product, please read the following instructions for use and keep them. The original description was written in Hungarian language.
Modern, touch-button table lamp with wireless charger.
STARTUP
In case of a new product, pull out the insulating strip from the watch's battery holder, later, in case of battery replacement, insert 1 CR2032 size 3 V
button cell into the battery holder on the stem of the lamp. This battery ensures the operation of the clock.
Connect the supplied mains adapter to the lamp and plug it into the socket. With the adapter, you can ensure the power supply of the lamp and the
LCD backlight.
The stem and head of the lamp can be adjusted in various ways and can be closed. The lamp head can be folded not only up and down, but also to the
side, so that everyone can find the ideal lighting for them.
A phone holder can be pulled out from the front of the base of the lamp, which can be fixed in several stages.
On the lamp, there is a prominent silicone strip on the common surface with the touch buttons, which is the place for Qi wireless charging. A red LED
indicates when the charger is ready to charge. Place your Qi-enabled phone with its charging surface on this red LED.
The charging process is indicated by the continuous lighting of the green indicator LED. If the green LED is flashing, charging has not started. At the
end of charging, the green LED goes out.
From the USB A charging socket on the back of the lamp we can charge various devices, e.g. rechargeable flashlight. 5V max. with a current of 2.1A,
Always follow the instructions of the manufacturer of the device to be charged!
In order to maximize charging capacity, it is not recommended to use Qi wireless and wired USB charging at the same time.
FUNCTIONS OF THE TOUCH BUTTONS
briefly touched: switching the lighting on/off
pressed and held: switching the LCD backlight on/off
increase brightness
∧ ∧
reduce brightness
∨ ∨
You can adjust the brightness in 5 levels.
M
You can choose between cold white (6000 K) or warm white (3000 K) light, and by using the two types of LEDs together, you can create
a natural color temperature.
The lamp remembers the settings and always switches on with the last settings.
BUILT-IN CLOCK BUTTONS:
SETTING THE EXACT TIME AND DATE
When the clock (TIME) is displayed, you can set the hour/minute/year/month/day values in order by pressing the S button with buttons ∧ ∧ and ∨ ∨ . You
can exit the setting at any time with the button M.
When the time is displayed, you can switch between the 12h and 24h time display with button ∧ ∧ . In the case of the 12 o'clock display, morning times
are indicated by AM, afternoon times by PM.
SELECTING THE TEMPERATURE UNIT
When the time is displayed, you can use button ∨ ∨ to switch between °C and °F temperature unit display.
SETTING OF THE ALARM AND SNOOZE FUNCTIONS
When TIME is displayed, press the M button to set the ALARM function. By pressing the S button, the hour/minute/alarm repeat in minutes (1-60) /
alarm melody (1-9) can be set in order.
When ALARM is displayed, you can use button ∧ ∧ or ∨ ∨ to activate the alarm and snooze function (SNOOZE), or deactivate the alarm function.
The alarm sounds for 1 minute and wakes you up again after the time set for the snooze function. During the alarm, the alarm can be stopped with the
S button.
M S
∧ ∧
3
∨ ∨