ACU-RITE IOB 610 Betriebsanleitung Seite 6

Informational notes
Observe the informational notes provided in these
instructions to ensure reliable and efficient operation of the
product.
In these instructions, you will find the following
informational notes:
The information symbol indicates a tip.
A tip provides important additional or
supplementary information.
The gear symbol indicates that the function
described
depends on the machine,
Your machine must feature a certain
software or hardware option
The behavior of the function depends on
the configurable machine settings
The book symbol represents a
to external documentation, e.g. the
documentation of your machine tool builder or
other supplier.
6
2
2.1
General accepted safety precautions, in particular the
applicable precautions relating to the handling of live
electrical equipment, must be followed when operating
the system. Failure to observe these safety precautions
may result in personal injury or damage to the product.
It is understood that safety rules within individual
companies vary. If a conflict exists between the material
contained in these instructions and the rules of a company
e.g.
using this system, the more stringent rules take
precedence.
2.2
The IOB 610 external input/output unit provides application
dependent switching input and output functions when
cross reference
connected to a compatible digital readout.
The IOB 610:
must only be used in commercial applications and in an
industrial environment
must be mounted on a standard 35 mm, DIN EN 50022
rail to ensure the correct and intended operation of the
product
is intended for indoor use in an environment in which
the contamination caused by humidity, dirt, oil and
lubricants complies with the requirements of the speci-
fications
Safety
General safety precautions
Intended use
ACU-RITE | IOB 610 | Operating Instructions | 04/2018