MITKO CLASSIC, PREMIUM, OCTA PRO Gebrauchsanweisung Seite 5

7. Our company declares that the statsitcal calcula� ons for the Mitkotent Premium
in sizes 3 × 3 m, 3 × 4,5 m, 3 × 6 m and Octa Pro in sizes 4 × 4 m, 4 × 6 m,
4 × 8 m have been carried out according to the PN-EN 13782:2015-2007 –
„Temporary objects – Tents – Safety" norm (original calcula� ons available at
the Manufacturer). The tents may be used with wind up to 28 m/s (100 km/h)
provided it is protected against wind gusts as described in tables no. 1. During
stronger wind, it is recommended in all cases to disassemble the tent (fi rst
remove the wall and then fold the roof). Mechanical damage resul� ng from
failure to follow the above recommenda� ons are not covered by the warranty.
At wind speeds of 50 km/h < 100 km/h, the Mitkotent Premium in size 3 × 6 m
and Octa Pro in size 4 × 8 m must be secured by placing, on middle legs, guy
rope at 1 m height and anchor it at an angle of 45 degrees.
Fig. 1. Mitkotent Premium 3 × 6 m and Octa Pro 4 × 8 m tents lines moun� ng
8. Mitkotents Premium in sizes 3 × 3 m, 3 × 4.5 m, 3 x 6 m and Octa Pro in sizes
4 × 4 m, 4 × 6 m, 4 × 8 m with unusual structures, i.e. with height increased by
max 0,5 m. Tent may be used with wind up to 14 m/s (50 km/h) provided it is
protected against wind gusts as described in table no. 1. During stronger wind,
it is recommended in all cases to disassemble the tent (fi rst remove the wall
and then fold the roof). Mechanical damage resul� ng from failure to follow the
above recommenda� ons are not covered by the warranty.
5/24