Seite 5
Insert both of the part C clips into the two slots of part B and make sure both of the clips pass entirely through the slot with its tip coming back out to the front to form a firm joint. Schieben Sie die beiden Laschen der Teile C in die beiden dafür vorgesehenen Schlitze der Teile B.
Seite 6
Insert both of the part C clips into the two slots of part B and make sure both of the clips pass entirely through the slot with its tip coming back out to the front to form a firm joint. Schieben Sie die beiden Laschen der Teile C in die beiden dafür vorgesehenen Schlitze der Teile B.
Seite 12
Move the rack to the desired place after finishing the assembly, then fix it to the wall with the anti- tipping devices to prevent any potential tipping hazards caused by uneven ground or unevenly distributed items. Positionieren Sie das Regal nach der Montage an der gewünschten Stelle und befestigen Sie es anschließend mit dem Kippschutz an der Wand, um zu vermeiden, dass das Regal durch...
Einleitung Hinweise Bitte lesen Sie die folgende Anleitung Das Produkt ist zum Gebrauch in Innenräumen vorgesehen. Eine andere Verwendung aufmerksam durch und verwenden Sie das oder eine Veränderung/ein Umbau des Produktes ist nicht erlaubt und kann zu Produkt sachgemäß. Verletzungen und/oder Beschädigungen des Produktes führen. Montieren und verwenden Sie das Produkt nur wie in dieser Anleitung beschrieben.
Seite 24
HELPING YOU LIVE YOUR EASIEST LIFE. 2023.11.24-V3...