Configuration Settings; Delay Until The First »Power Out« Socket Is Active; Delay Until Further »Power Out« Sockets Are Active - G&D MultiPower-12 Installationsanleitung

Configuration settings

Delay until the first »Power Out« socket is active
After you turn on the central power supply, the first
delay of 0.7 seconds (
You can decrease or increase the delay by entering values between 0.0 and 10.0 sec-
onds (standard: 0.7 seconds).
How to adjust the delay until the first »Power Out« socket is active:
1. Start the terminal emulator.
2. Load the connection settings of the setup menu and establish the connection.
3. Press R within the terminal emulator.
4. Use the Arrow or Arrow
5. Use the or
Arrow Arrow
6. Press to save your settings.
S
Delay until further »Power Out« sockets are active
Following the first
Power Out
delay of 0.1 seconds.
You can decrease or increase the delay by entering values between 0.0 and 2.0 sec-
onds (standard: 0.1 seconds).
How to adjust the delay until further sockets are enabled:
1. Start the terminal emulator.
2. Load the connection settings of the setup menu and establish the connection.
3. Press within the terminal emulator.
R
4. Use the Arrow or Arrow
5. Use the Arrow or Arrow
6. Press S to save your settings.
).
Power Start Delay
keys to select Power Start Delay
keys to decrease or increase the adjusted value.
socket,all other sockets become successively active with a
keys to select Power Channel Delay
keys to decrease or increase the adjusted value.
Setup menu
Power Out becomes active after a
.
.
G&D MultiPower-12 · 8