Werbung
Verfügbare Sprachen
Verfügbare Sprachen
158
Navigation
Moving the map section
(Colour Info Display only)
As soon as "Move" is activated, a cursor is
displayed and you can move the map
using the rocker switch.
☞
Select the "Map scroll" menu item in the
menu bar.
☞
Move the map using the rocker switch
d and position the required map area
behind the cursor.
☞
Select the "Map scroll OFF" menu item in
the menu bar to restore the original
map section (current position or
destination) and hide the cursor.
When active guidance is selected, the
!
"Move" function cannot be activated.
All manuals and user guides at all-guides.com
Entering destinations via the map
(Colour Info Display only)
While the position or destination map is
displayed:
☞
Activate the cursor with the "Move"
menu item if it is not already shown.
☞
Move the cursor to the desired point on
the map.
☞
Initially use a large map scale (e.g. 20,
50, 100 km) to roughly set the map
section.
☞
Then select a small scale to show a
detailed map of all roads and to be
able to exactly define the destination.
☞
Select the "Set destin. point" menu item
in the menu bar to accept the selected
position on the map as the destination.
The "Destin. input" menu with the
✔
details of the new destination is
displayed.
☞
Select "Save" to save the destination in
the address book.
or:
☞
select "Start Navi" to activate guidance
to the new destination.
If you have activated the display of
!
points of interest (e.g. petrol stations)
in the "Navi Settings" menu, these are
indicated on the map by
corresponding symbols. See page 166.
Werbung
