Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6 mm
Shorten
Riding your bike with an improperly adjusted hinge and/or broken Safety Pin could cause injury and harm.
The Retainer Screw is not used to adjust the Physis Lever tightness. Only fine-tune the Physis Lever tightness by readjusting the Adjustment
Bolt.
Do not tamper with the Retainer Screw at any time unless disassembling. Always apply Loctite if the Retainer Screw is removed and
reinstalled.
All manuals and user guides at all-guides.com
C) TO ADJUST the Physis Lever for play or stiffness, please use a 6 mm
wrench (not included).
• If the Physis Lever requires too much force to open or close, shorten
Lengthen
the Adjustment Bolt by rotating one spring lock click (1/4 turn) away
from Security Knob.
• If the Physis Lever can easily open or close, lengthen the Adjustment
Bolt by rotating one spring lock click (1/4 turn) toward Security Knob.
• To quickly determine whether or not the Physis Lever is properly
adjusted, gently try to open the Physis Lever without lifting the
Security Knob. There should be a spring-back force to keep the Physis
Lever in place.
EN
ES
FR
IT
JP
TC
SC
KO
DE
3
Werbung
