Audizio VICENZA Bedienungsanleitung Seite 15

If you choose not to use NTP for clock synchronization, highlight the NTP (Network time protocol) and press OK to
make the change. You will see the Set Date & Time appeared on the menu. Select it and adjust the date and time as
you desire.
•
NTP Server
NTP is designed to synchronize a device's clock with a time server. Here it shows the server being used for the radio.
Language
The default language is English, you can choose other languages as preferred. Scroll with the [▲/▼] buttons on remote or
[Dial/Select] knob to the item with
Scroll to highlight and press OK to select your language of choice. Multiple languages are available.
DAB Setup
•
DAB full scan
You can always carry out a new DAB scan by selecting this option. All current presets and channels will be erased.
•
DAB station status
This is to show the number of stations and signals received of each DAB frequency.
•
DAB station list
The scanned DAB stations will be listed here for management. You can move position or delete any station. Scroll to
the station and press [►]. A pop-up window will be presented: Move up, Move down and Delete.
FM Setup
•
Scan setting
Either "All stations" or "Strong stations" (with stronger signal) can be selected.
•
Audio setting
You can choose to set "Auto Stereo" or "Forced mono" for the reception.
•
FM full scan
You can always carry out a new scan of FM channels by selecting this option. All current presets and channels will be
erased. The radio channel at the lowest frequency of the scanned values will be highlighted. The preset list will be
saved unless a new preset scan is carried out.
•
FM station list
You can adjust the preset ranking by Move down, Move up or Delete it. Highlight one of the presets, then press the
[►] button, it will enter the Edit menu. Press the [◄] button to return to the Preset list.
Local Radio
The radio is set by default to detect the radio stations in your local area automatically through internet connection and these
stations can be accessed in the Local Radio menu under Skytune menu. You can also set Local in another region if you want.
Highlight the Local Radio and press OK. Choose Manual-set Local radio to change the region setting.
Playback Setup
This is to set the mode of playback under UPnP/DLNA compatible streaming: Repeat All, Repeat Once or Shuffle.
Power-on Options
•
Resume once ready
This is set by default. The radio will resume playing the last played station when it is power on the next time.
•
Ready to use
Choose this option if you want the radio to stay on the Home screen without playing anything when it is power on
the next time.
Dimmer
You can set the backlight level for the display as you prefer. There are two settings:
Mode - Normal or Power Saving
▪
Normal - the display will stay with the same level of brightness all the time without dim down.
Dim - the display will dim down after 20 seconds if no operation is made on the radio.
Level - Bright and Dim
▪
Bright - This is to adjust the level of brightness in Normal mode.
Dim - This is to adjust the level of brightness in Dim mode.
•
Dimmer in Standby
The display brightness in standby mode can be adjusted manually by turning the rotary knob [Dial/Select] or press
the [▲/▼] buttons on remote. Increasing the backlight beyond the system level will illuminate for 20 seconds and
then dim to default setting automatically.
EQ(Equaliser)
Various music genres can be set.
Buffer Time
Sometimes you may experience uneven playback of the internet radio. This can happen if the internet connection is slow or
network congestion occurs. To help improving the situation, you can choose longer buffer time to get a few seconds of radio
stream before beginning to play.
and press [OK] .
15