ECOheat Connect+ Bedienungsanleitung Seite 31

Parameter Setting
Turn off the thermostat by pressing the Multi Function Button (F) and then long-press the same button (F)
to enter the Parameter Setting page. Each press of the Multi Function Button (F) or Mode Button (M) will
go to the next position in the menu. You can turn the Multi Function Button (F) left or right to change the
various value settings.
To exit, either wait until backlight turns off or long-press the Multi Function Button (F).
Menu Description
Position
01 Temp. Calibration for Internal Sensor
02 Set Point Max.
03 Set Point Min.
05 Frost Protection Temperature
09 Dead Zone
11 Child Lock
12 Open Window Detect Function
13 OWD Detect Time
14 OWD Drop Temp. Select
(within detection time)
15 OWD Delay Time Select
(Return to previous working status)
17 Factory Reset
Software Number
Version Number
Thermostat ID Code
31 Battery Power Indication
Range
-8 - 8 °C
5 - 35 °C
5 - 35 °C
5 - 15 °C
0 - 3 °C
1: Lock 0: Unlock
ON / OFF
2 - 30 mins
2/3/4 °C
10 - 60 min
1: Yes, then press
Multi Function Button (F)
for 5s and wait for the
thermostat to restart.
Read only
Read only
Read only
Read Only
ecoheat Connect+ Bedienungsanleitung | 31
Default Value
0 °C
35 °C
5 °C
5 °C
0 °C
0
OFF
15 mins
2 °C
30 mins
Volts