Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Child Lock
With Child Lock ON (refer to menu position 11 in section Parameter Setting), the buttons will be locked once
backlight turns off. Long-press F button to unlock. As soon as the backlight turns off, the Child Lock will be
active again.
Mode Selection
Press P button to select either Manual Mode
Press M button to select between Heat Mode & Cool Mode
Heat Mode:
Heating active symbol:
In Manual Mode the temperature is set by adjusting the Multi Function Button (F). This set temperature will
be kept untill a different one is set. In PRG Mode the temperatures are programmed for each day/period,
please refer to section below.
Note:
Even if the thermostat is set to PRG Mode, you can change the temperature by adjusting the Multi Function
Button (F). However, this newly set temperature will only be active temporarily, it will not be kept when the
next period in the program begins.
Program Setting
After pairing the thermostat with the receiver and connecting the system to Wi-Fi, everything can be
programmed via the ecofort SMART application (please refer to section Pairing).
Alternatively, the thermostat can also be programmed without Wi-Fi: Press and hold P button for 3s to enter
the Program Setting.
Set the schedule (Weekday->Period->Start Time->Temperature) by adjusting the Multi Function Button to
left or right to change the value of each setting, press P button to go to the next item setting.
Default Setting:
Period
1
Day
Time
Temp
1,2,3,4,5
7:00
22 °C
6
8:00
22 °C
7
8:00
22 °C
30 | ecoheat Connect+ Bedienungsanleitung
Cool Mode:
Cooling active symbol:
2
Time
Temp
Time
8:30
19 °C
12:00
8:30
22 °C
12:00
8:30
22 °C
12:00
or Program Mode (PRG) .
3
4
Temp
Time
Temp
22 °C
14:00
19 °C
22 °C
14:00
22 °C
22 °C
14:00
22 °C
5
Time
Temp
Time
17:00
22 °C
22:00
17:00
22 °C
23:00
17:00
22 °C
23:00
6
Temp
19 °C
19 °C
19 °C
Werbung
