MOB PO BOX 644 Bedienungsanleitung Seite 2

MO2184
EN
Wireless charger
Specifications:
1. Type-C input
2. Charging area
3. Indicator
Parameters:
Input (Type-C): DC 5V/2A,9V/2A
Output (Wireless): DC 5V/1A,7.5V/1A, 9V/1.1A, 9V/1.67A
Operation:
1. Connect the charger with a suitable power supply by using the
cable provided. Place your device on the top of the charger
properly, to avoid connection failure. We recommend that you
remove the devices protective case for optimum use. A
minimum 9V input is required for 15W wireless output. If below
9V input is used only, 5W wireless output is achievable. The
charging speed may vary per device and by type of power input.
2. Once connected to a power source, the indicator light turns red.
The charger then enters standby mode.
3. You can place any device that supports wireless charging
feature in the designated charging area. if the blue light is on,
this means charging is working. If metal objects are on top of
charging surface, the light will flash in blue colour.