Herunterladen Diese Seite drucken

ELMEKO SH 100D Montage- Und Betriebsanleitung Seite 3

Schaltschrank-heizungen

Werbung

ANWENDUNG
APPLICATION
Temperaturschwankungen in Schaltschranken und Gehäusen führen, insbesondere bei Außenaufstellung, zur Bil-
dung von Kondenswasser und dadurch zu Funktionsstörungen und Korrosion. Durch den Einbau von Schalt-
schrankheizungen werden Temperaturschwankungen ausgeglichen und die Kondensatbildung verhindert.
Schaltschrankheizungen kommen z. B. in Windkraftanlagen, Ampelanlagen, Verkehrsüberwachungssystemen,
Fahrkartenautomaten, Krananlagen, Telekommunikationssystemen sowie in Maschinen für die Lebensmittelin-
dustrie zum Einsatz.
Temperature variations inside control cabinets and housings, especially when installed outside, lead to conden-
sation of water and consequently to malfunction and corrosion. Through the use of enclosure heaters, tempera-
ture variations can be reduced and condensation of water avoided. Enclosure heaters are used e. g. in wind tur-
bines, traffic lights, traffic monitoring systems, ticket machines, crane systems, telecommunication systems as
well as in machines for the foodstuff industry.
TECHNISCHE DATEN
Bezeichnung Type
Artikelnummer Part number
Eingangs-Spannungsbereich
Input voltage range
Heizleistung bei 20 °C
Thermal output at 20 °C
Heizelement
Heating element
Abmessungen (L x B x H)
Dimensions (L x W x D)
Stromaufnahme
Amperage
Einschaltstrom
Inrush current
Vorsicherung
Fuse
Einbaulage
Fitting position
Anschluss
Connecting
Schutzart
Degree of protection
Schutzklasse
Protection type
Lebensdauer
Service life
Gewicht
Weight
Einsatztemperatur
Operating temperature
Umgebungstemperatur
Ambient temperature
Zulassungen
Approval
EIGENSCHAFTEN
- Festwiderstand mit Temperaturbegrenzer
- Befestigung mit Halteclip auf Tragschiene
3
TECHNICAL DATA
SH 75D
20 75S D0X
400 V AC/DC
70 W
Festwiderstand
Fixed resistor
185 x 80 x 83
0,18 A
0,2 A
4 A (T)
Vertikal - Anschluss unten und Luftaustritt oben
Vertical – connection on bottom and air outlet up
Anschlussklemme
Terminal
IP20
I
100.000 h
1180 gr.
-40 °C ... +40 °C
-40 °C ... +70 °C
CE
SH 100D
20 10S D0X
400 V AC/DC
100 W
Festwiderstand
Fixed resistor
215 x 80 x 83
0,25 A
0,3 A
4 A (T)
Anschlussklemme
Terminal
IP20
I
100.000 h
1440 gr.
-40 °C ... +40 °C
-40 °C ... +70 °C
CE
FEATURES
- Fixed resistor with temperature limiter
- Attachment with clip on mounting rail

Werbung

loading

Diese Anleitung auch für:

Sh 75d