Braun BC22 Kurzanleitung

BC22
Alarm clock
Quick set-up guide
For detailed information refer to
the full user manual available at
www.braun-clocks.com/pages/warranty
or scan this code:
Braun helpline
Should you have a problem with your
product, please check your local service
centre at:
www.braun-clocks.com
www.braun-watches.com
Certain trademarks used under license from the
Procter & Gamble Company or its affiliates.
Battery installation
1. Remove the battery cover.
2. Insert 3xAA (1.5V) battery observing the
correct polarity, as shown on the diagram.
3. Replace battery cover.
Only use new alkaline batteries from a
reputable brand.
Time setting
Turn the time set knob ( )on the back of the clock
in the direction of the arrow until the correct time is
shown.
Alarm setting
Turn the alarm set knob ( )on the back of the
clock in the direction of the arrow until the desired
alarm time is shown.
Alarm function
To set the alarm, move the slider on the right side of
the clock upwards. The alarm is set when the green
colour indicator is visible. To unset the alarm, move
the slider on the right side of the clock downwards.
Snooze function
When the alarm is sounding, push the button at the
top of the clock and the SNOOZE/LIGHT function
will be activated. The alarm will be stopped and will
sound again after ~5 minutes.
Backlight function
Anytime, push the button at the top of the clock and
the backlight function will be activated. The dial will
be illuminated for ~5 seconds.