Maintenance of the blade (Fig.5)
Regularly remove grass and dirt from the leaves.
At the beginning of the garden season, carefully check the
condition of the leaves.
If the knife is very blunt, you should sharpen it or replace it.
If the blade is damaged or worn, fit a new blade.
Warning! Please observe the following precautions:
Disconnect the mower from the mains and wait until the blade
stops rotating before continuing.
Be careful not to cut yourself. Use gloves for heavy work or a
cloth to hold the knife.
Use only the specified replacement blade.
Do not remove the rotor for any reason.
To replace the blade:
Turn the mower on its side.
Insert the bushing into the motor shaft.
Line up the blade, the flat disc and the spring washer.
Place the blade screw in the holes.
Tighten the blade screw with the sleeve.
26