Hoover 48019757 Bedienungsanleitung Seite 9

Chapter 2.6: Auto Shut off Function
The auto shut off function automatically switches off the appliance if the trigger (11) has not been used after 10
minutes.
The main switch (13) will beeping and flash with red color to remind you that the appliance start go into
standby status, you must switch on the appliance again.
Chapter 3: Maintenance and Cleaning
All the maintenance and cleaning operations have to be carried out when the unplugged appliance has cooled
down for at least 2 hours, to prevent any risk of burns.
Chapter 3.1 - Cleaning the Appliance
Do not use any detergent or descaling products for cleaning the soleplate. Regularly clean it with a humid and
non-metallic pad.
Empty the water tank after each use before storing it, to empty the water tank, press the trigger to release
steam until no steam come out.
To clean the plastic parts of the stand, please use soft clothes.
Chapter 3.2: Lock System
Switch off the appliance and unplug it.
Empty the water tank, to empty the water tank, press the trigger to release steam until no steam come out.
Put the iron on the heat-resistant iron rubber studs (5). Wait at least 30 minutes allowing the soleplate and the
generator to cool down.
Then follow the underneath indications in order to lock correctly your iron.
NOTE:
To lock the iron, you must ensure the soleplate is embedded in the rear rubber (3).
To unlock it, you must press the lock button then recover the hook to normal position.
Chapter 3.4: Cord Storage
Store the power cord with cord storage holder (1), and store the steam hose in
the steam hose storage (8).
Then you can take away your appliance in order to store it safely and easily.
7 - GB
1
Fig. 7: Domestic Iron Lock System
2
1
2
1
Fig. 8: Cord Storage