Hoover 48019757 Bedienungsanleitung Seite 10

Troubleshooting
These are common problems you may encounter when using your appliance.
If you are unable to solve any issue please contact your local Hoover Service Office.
Problem
The Iron does not heat up.
The appliance does not
produce steam
The soleplates becomes
dirty or brown
Water stripes appear on
the textile
The empty water tank
indicator light flash and
alarm
8 - GB
Cause
There is a connection problem.
The appliance is not switched on.
The soleplate temperature is too low.
The appliance is not switched on
The tank may be empty
You are not pressing the steam trigger
The soleplate temperature is set to
the maximum
There should be chemical or additives
in the water used for ironing
The linen is still dirty
Your ironing board cover is saturated
in water
There is no more water in the tank
Solution
Check the mains cord, the plug and the
wall socket
Press on the on/off switch
Set a higher temperature of the
soleplate
Press on the on/off switch
Refill the water tank
Press the steam trigger
It works but steam is not visible as very
hot and dry.
Never use any chemical or additives in the
water. Contact your after sales service if
the linen is still dirty
Clean the soleplate with a non-metallic
sponge
Change the cover or use a mesh ironing
board
Refill the water tank with water