FS IPC301-5M-F Anleitung Seite 4

3
Alarm in
4 Power interface
5
Audio out
6 Ethernet interface
7
Alarm out
Installation Requirements
Precautions
Use a power adapter or a PoE device that meets requirements.
Otherwise, the device may be damaged.
Be careful not to blur, scratch, damage the dome cover or leave
fingerprints on it because this could decrease image quality. Keep
the protective film on the dome cover until installation is complete.
Make sure the length of the power cable between the power
adapter and the camera is not too long, otherwise the voltage of the
camera is lowered, causing the camera to work abnormally. If it is
required to lengthen the power cable, lengthen the cable between
the power adapter and the mains.
Do not overbend the cables during the installation, otherwise, poor
cable contact may cause malfunction.
When connecting to an external interface, use an existing
connection terminal, and ensure that the cable terminal
(latch or clamp) is in good condition and properly fastened. Ensure
Alarm input
Connect power adapter
Audio output
RJ45, 1*10M/100M Base-TX Ethernet
interface. Connect Ethernet network.
Description
(Please refer to the latest product
datasheet for detailed specifications.)
Alarm out
EN 3