Sie brauchen Hilfe
bei der Inbetriebnahme
des EDGE Device?
Treten Sie mit unserem
Support in Kontakt:
e-connect@engel.at
Tel. +43 50 620 3333 (kostenlos)
Montag bis Freitag
8:00 – 16:00 Uhr (MEZ)
8 | DE
General note
The network 172.17.0.0/16 is preset and can therefore not be used
for LAN1, LAN3 and the machine(s)!
If you are already using this network (or a subnet) internally and this is
still necessary, please contact the responsible service department at
e-connect@engel.at for further steps.
1. Registering your EDGE device on the
e-connect customer portal
To register your EDGE device, you must be registered as a user on the
e-connect customer portal. If this is not the case, please register here
https://reg-portal.engelglobal.com.
Note: The registration of an EDGE device is only permitted
for users with the "Administrator" role.
EN | 9