ONKRON TS1220 Benutzerhandbuch Seite 5

3. Disassembly
Use a wrench (J) to take off a screw on the clamp of the lower rail (D).
The clamp must open easily.
4. Installation
4.1 Put your TV with the screen side on a flat surface, you can also use a
soft cloth to protect
TV, using suitable
spacer (G). This spacer (G) will be used with the safety cable. Look at the
picture below:
4.1
M_
4.2 Install the rail (D) in the lower holes of the TV, using suitable
(M-A), (M-B) and the square washer (M-F).
of the lower rail (D):
of the rails onto
the screen. Install
bolts (M-A), (M-B), square
M_
O
M-F
the TV:
rail (C) in the upper holes of the
washer
c
D
ÖÖÖ
ONKRON
(M-F), through
screws
5