ONKRON TS1220 Benutzerhandbuch Seite 10

ONKRON
8.2 Installation
a single-layer
Put the bracket
of 43.3" - 53.1'
floor. Mark drilling
Put the bracket away for a while.
Put the second
15.7" — 25.6" (400 - 650 mm) from the first
bracket (H). Mark
second bracket.
Drill 3.1" (80 mm) deep holes using a Ø4mm
(5/32") dri II.
10
of the bracket
drywall sheet:
(H) to the wall at a distance
(1 100 - 1350 mm) from the
spots of the first bracket.
bracket (H) at a distance
drilling
3.1"
(80 mm
Lay the safety cable (F) through
upper rail of the stand, and through
holes in the
Use key (J) to tighten
the bracket (H) to fix the cable
4}
for fixation on a wood strip
of
spots of the
the
spacers (G).
the screw in
(F).
under
15.7-25.6"
(400-650 mm)