ONKRON TS1220 Benutzerhandbuch Seite 4

ONKRON
1. Tripod assembly:
Take three legs (x2 A, xl B) and twist them into the main pole (E), as
shown on the picture:
Twist the legs tightly,
All three
space between the socket and the legs. Do not overtighten
screws of the legs, it may damage the legs or/and the socket.
2. Adjusting of the locking
Put the locking
between the upper part and the locking clamp 1.97"
mm). Tighten the screw using key (J).
Make sure the locking clamp is securely fixed, before installing
the TV.
4
make sure they adjoin the triple socket.
legs must be twisted
clamp:
clamp on the main pole. Recommended
-J
in completely, with
- 5.9" (50-150
1,970- 5,9"
(50-150 mm)
no free
the
distance