Werbung
Verfügbare Sprachen
Verfügbare Sprachen
32229L
1. Timing Light
2. Test Clip (green): for RPM, Dwell, Voltage tests
3. Battery Clip red to supply the Timing Light powered from the vehicle battery
4. Battery Clip black to supply the Timing Light powered from the vehicle battery
5. Main Cable for the Timing Light
6. Inductive Pick-up Lead: to clamp onto #1 spark plug of ignition engine system
SAFETY PRECAUTIONS
To prevent accidents that could possibly result in serious injury and/or damage to
vehicles and/or test equipment, carefully observe all safety rules and test procedures
when working on vehicles.
Do not wear loose clothing or jewelry while working on engine. Loose clothing can
get caught in fan, pulleys, belts, etc. Jewelry can conduct current and can cause
severe burns if comes in contact between power source and ground.
Before working on a vehicle, set the brakes and block the wheels. Beware of
automatic parking brake releases.
When the engine is running, it produces carbon monoxide, a toxic and poisonous
gas. Always operate the vehicle in a well ventilated area. Do not breathe exhaust
gases – they are hazardous that can lead to death.
Fuel and battery vapors are highly flammable.
Do not smoke near the vehicle during testing.
When engine is running, many parts (such as pulleys, coolant fan, belts, etc) turn
at high speed. To avoid serious injury, always be alert and keep a safe distance
from these parts.
Engine parts become very hot when engine is running. To prevent severe burns,
avoid contact with hot engine parts.
Never lay tools on vehicle battery. You may short the terminals together causing
harm to yourself, the tools or the battery.
SW-Stahl und Werkzeugvertriebs GmbH
Leverkuser Strasse 65
D-42897 Remscheid
All manuals and user guides at all-guides.com
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
E-Mail: info@swstahl.de
Werbung
